China Standard Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni with Best Sales

Product Description

Agricultural Bevel gear RC-200 Rotary Cutters Gearboxes Replacement of Omni

 

Torque 21,000 – 28,350 lb-in.
(2,371 – 3,201 Nm.)
Ratios 1.21:1, 1:1, 1:1.21, 1:1.46
Gear Type Bevel
Seal type Triple lip spring loaded
Bearing Tapered Roller
Oil capacity 174 oz.
(5.2 liters)
Weight 220 lbs.
(99.8 kg.)

Important: In the factory, the gearbox is not filled with gear oil. The gear box must be filled up before the tool is put into use. If the amount of gear oil is not appropriate, the gear box will be damaged.

Check that cotter pins and roll pins (top of gearbox output shaft and through tailwheel shaft) are securely installed to ensure equipment is in safe condition for cutting tool service.

Connect the lawn mower to the three-point joint of the tractor. Do not install the driveline. Raise and lower the cutter to determine the maximum and minimum distance between the tractor PTO shaft and the gearbox input shaft. If the distance is too large, the drivetrain will be too short for proper meshing; This can damage the driveline during operation. If the distance is too small, the drivetrain can hit the bottom during operation, damaging the cutter or tractor. If the drivetrain is too short, ask your bad boy Cutter dealer for a longer drivetrain. If the drivetrain is too long, follow the instructions below to shorten the drivetrain.

Related Products

Factory

Application

 

Our factory

 

 

Type: Agricultural Gearbox
Usage: Farmland Infrastructure, Agricultural Machine
Material: Carbon Steel
Power Source: Electricity
Weight: OEM
After-sales Service: Installation Guide
Samples:
US$ 999/Piece
1 Piece(Min.Order)

|
Request Sample

rotary cutter gearbox

Design Features for Longevity and Durability in Rotary Cutter Gearboxes

Manufacturers incorporate several design features to enhance the longevity and durability of rotary cutter gearboxes:

  • Robust Housing: Gearbox housings are designed to withstand external forces, impacts, and vibrations, protecting internal components.
  • Bearing Support: High-quality bearings with proper load-bearing capacity and sealing are used to minimize friction, wear, and premature failure.
  • Gear Tooth Geometry: Precision-cut gear teeth and suitable tooth profiles distribute loads evenly, reducing wear and enhancing efficiency.
  • Heat Treatment: Components undergo heat treatment processes to improve their hardness and strength, ensuring they can withstand heavy loads.
  • Sealing: Effective seals prevent dirt, debris, and moisture from entering the gearbox, preserving lubrication and preventing corrosion.
  • Lubrication System: Well-designed lubrication systems ensure consistent and adequate lubrication to critical components, reducing friction and wear.
  • Reinforced Components: Critical parts such as shafts, gears, and bearings may be reinforced or treated to resist wear and fatigue.
  • Alignment and Tolerance: Precise manufacturing techniques and proper alignment during assembly minimize stress, noise, and wear.
  • Overload Protection: Some gearboxes may include overload protection mechanisms to prevent damage from sudden spikes in load.

These design features collectively contribute to the longevity, durability, and reliable performance of rotary cutter gearboxes in challenging operational conditions.

rotary cutter gearbox

Advantages of Rotary Cutter Gearboxes for Efficient Land Clearing:

Rotary cutter gearboxes play a crucial role in achieving efficient land clearing and vegetation management. Here are some key advantages they offer:

  • High Cutting Efficiency: Rotary cutter gearboxes are designed to deliver high cutting efficiency, allowing for the quick and effective clearing of thick vegetation, underbrush, and small trees.
  • Uniform Cutting Performance: These gearboxes ensure consistent and uniform cutting performance across the entire cutting width, resulting in an even and well-maintained surface.
  • Versatility: Rotary cutter gearboxes can handle a wide range of cutting tasks, from mowing grass and weeds to clearing dense brush and foliage.
  • Improved Productivity: The efficient cutting action of rotary cutter gearboxes helps operators complete land clearing tasks more quickly, increasing overall productivity.
  • Reduced Labor Costs: The use of rotary cutter gearboxes reduces the need for manual labor in land clearing operations, leading to cost savings.
  • Minimal Ground Disturbance: Rotary cutter gearboxes allow for precise cutting close to the ground, minimizing soil disturbance and preserving the natural landscape.
  • Enhanced Safety: With proper usage and safety measures, rotary cutter gearboxes provide a safe and controlled method of land clearing, reducing risks associated with alternative methods.
  • Low Maintenance: Well-designed rotary cutter gearboxes require minimal maintenance, contributing to long-term reliability and cost-effectiveness.

Overall, rotary cutter gearboxes offer the advantage of efficient and effective land clearing, making them a valuable tool in various industries such as agriculture, forestry, landscaping, and construction.

rotary cutter gearbox

Rotary Cutter Gearbox: Function and Applications

A rotary cutter gearbox is a mechanical device designed to transmit and modify rotational motion between an input shaft and an output shaft. It is commonly used in various applications that require cutting or shredding, especially in agricultural, landscaping, and industrial contexts. The gearbox enables the rotary cutter to efficiently convert input power into rotary cutting motion, allowing it to perform tasks such as mowing, mulching, and clearing vegetation.

In agricultural settings, rotary cutter gearboxes are often integrated into equipment like rotary mowers, flail mowers, and brush cutters. These machines are used for maintaining fields, pastures, roadsides, and other areas by cutting down tall grass, weeds, and brush. In landscaping and groundskeeping, rotary cutter gearboxes find application in lawn mowers, brush hogs, and trimmers, contributing to well-maintained outdoor spaces.

Industrial applications of rotary cutter gearboxes include wood chippers, where they facilitate the cutting and processing of wood into smaller pieces for various purposes. They are also utilized in manufacturing and recycling processes to shred materials like plastics, rubber, and metal scraps.

The versatility of rotary cutter gearboxes stems from their ability to adapt to different cutting attachments and blades, allowing them to handle various materials and conditions. Proper selection and maintenance of rotary cutter gearboxes are essential to ensure efficient cutting performance, extend their lifespan, and maintain safe operation.

China Standard Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni   with Best Sales China Standard Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni   with Best Sales
editor by CX 2023-11-15

Recent Posts