China wholesaler Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni comer gearbox

Product Description

Agricultural Bevel gear RC-200 Rotary Cutters Gearboxes Replacement of Omni

Torque 21,000 – 28,350 lb-in.
(2,371 – 3,201 Nm.)
Ratios 1.21:1, 1:1, 1:1.21, 1:1.46
Gear Type Bevel
Seal type Triple lip spring loaded
Bearing Tapered Roller
Oil capacity 174 oz.
(5.2 liters)
Weight 220 lbs.
(99.8 kg.)

Important: In the factory, the gearbox is not filled with gear oil. The gear box must be filled up before the tool is put into use. If the amount of gear oil is not appropriate, the gear box will be damaged.

Check that cotter pins and roll pins (top of gearbox output shaft and through tailwheel shaft) are securely installed to ensure equipment is in safe condition for cutting tool service.

Connect the lawn mower to the three-point joint of the tractor. Do not install the driveline. Raise and lower the cutter to determine the maximum and minimum distance between the tractor PTO shaft and the gearbox input shaft. If the distance is too large, the drivetrain will be too short for proper meshing; This can damage the driveline during operation. If the distance is too small, the drivetrain can hit the bottom during operation, damaging the cutter or tractor. If the drivetrain is too short, ask your bad boy Cutter dealer for a longer drivetrain. If the drivetrain is too long, follow the instructions below to shorten the drivetrain.

Our Factory:

1. Shell: made of high rigidity fc-25 cast iron;
2. Gear: high purity alloy steel 20crmnt is used for quenching and tempering, carburizing, quenching and grinding;
3. Spindle: high purity alloy steel 40Cr quenching and tempering processing, with high hanging load capacity.
4. Bearing: equipped with tapered roller bearing with heavy load capacity;
5. Oil seal: imported double lip oil seal, with the ability of dust and oil leakage.
Product lubrication:
The use of proper lubricating oil for t spiral bevel gear commutator can give full play to the efficiency of the steering gear and improve its service life.
1. The initial wear period is 2 weeks or 100-200 hours. There may be a small amount of metal wear particles between them. Please clean the interior and replace it with new lubricating oil;
2. In case of long-term use, change the lubricating oil every half a year or 1000-2000 hours.
Technical parameters of T spiral bevel gear commutator:
It can be equipped with single horizontal axis, double horizontal axis, single vertical axis and double vertical axis 1:5, 1:5, 1:1, 1:5, 1:5, 1:1

Related products:

Application:

Company Profile:
Services
Also I would like to take this opportunity to give a brief introduction of our CHINAMFG company:

Our company is a famous manufacturer of agriculture gearbox,worm reduce gearbox, PTO shafts, Sprockets ,rollar chains, bevel gear, pulleys and racks in china.

We have exported many products to our customers all over the world, we have long-time experience and strong technology support. 

-Ø Our Company with over 12 year’s history and 1000 workers and 20 sales.
-Ø With over 100 Million USD sales in 2017
-Ø With advance machinery equipments
-Ø With large work capacity and high quality control, ISO certified.
……

You also can check our website to know for more details, if you need our products catalogue, please contact with us.

Application: Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function: Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout: Coaxial
Hardness: Hardened Tooth Surface
Installation: Horizontal Type
Step: Three-Step
Samples:
US$ 9999/Piece
1 Piece(Min.Order)

|
Request Sample

rotary cutter gearbox

Materials in Rotary Cutter Gearbox Construction

Rotary cutter gearboxes are crafted from durable and high-strength materials to ensure longevity and optimal performance:

  • Alloy Steels: These steels offer excellent strength, toughness, and wear resistance, making them ideal for gears, shafts, and other critical components.
  • Hardened Steel: Heat-treated and hardened steel components enhance the gearbox’s ability to handle heavy loads and resist wear.
  • Cast Iron: Cast iron is commonly used for gearbox housings due to its durability, rigidity, and ability to withstand impact and external forces.
  • Stainless Steel: Stainless steel may be used for certain components to provide corrosion resistance, particularly in gearboxes exposed to moisture or harsh environments.
  • Bronze: Bronze bushings or bearings may be utilized for their self-lubricating properties and wear resistance.
  • Seals and Gaskets: Rubber, synthetic elastomers, or other sealing materials are employed to create effective seals, preventing contaminants from entering the gearbox.
  • Lubricants: High-quality lubricating oils or greases are chosen based on their ability to withstand heavy loads and provide sufficient lubrication under operational conditions.

By selecting appropriate materials, manufacturers ensure that rotary cutter gearboxes can withstand the demands of heavy-duty use and maintain reliable cutting performance over time.

rotary cutter gearbox

Handling Cutting Speeds and Blade Configurations in Rotary Cutter Gearboxes:

Rotary cutter gearboxes are designed to accommodate various cutting speeds and blade configurations to suit different tasks and conditions. The gearbox’s gear ratio, which determines the output speed relative to the input speed, can be optimized for specific cutting requirements. Different blade configurations, such as the number and arrangement of cutting blades, can also be accommodated by adjusting the gearbox’s design.

For example, gearboxes with adjustable gear ratios allow operators to select the appropriate cutting speed based on factors like the type of vegetation and desired cutting results. Additionally, rotary cutter gearboxes can be equipped with different output shafts or adapters to fit various blade configurations, including single or multiple blades. This versatility enables rotary cutter gearboxes to effectively handle a wide range of cutting tasks in agricultural, landscaping, and land management applications.

rotary cutter gearbox

Rotary Cutter Gearbox: Function and Applications

A rotary cutter gearbox is a mechanical device designed to transmit and modify rotational motion between an input shaft and an output shaft. It is commonly used in various applications that require cutting or shredding, especially in agricultural, landscaping, and industrial contexts. The gearbox enables the rotary cutter to efficiently convert input power into rotary cutting motion, allowing it to perform tasks such as mowing, mulching, and clearing vegetation.

In agricultural settings, rotary cutter gearboxes are often integrated into equipment like rotary mowers, flail mowers, and brush cutters. These machines are used for maintaining fields, pastures, roadsides, and other areas by cutting down tall grass, weeds, and brush. In landscaping and groundskeeping, rotary cutter gearboxes find application in lawn mowers, brush hogs, and trimmers, contributing to well-maintained outdoor spaces.

Industrial applications of rotary cutter gearboxes include wood chippers, where they facilitate the cutting and processing of wood into smaller pieces for various purposes. They are also utilized in manufacturing and recycling processes to shred materials like plastics, rubber, and metal scraps.

The versatility of rotary cutter gearboxes stems from their ability to adapt to different cutting attachments and blades, allowing them to handle various materials and conditions. Proper selection and maintenance of rotary cutter gearboxes are essential to ensure efficient cutting performance, extend their lifespan, and maintain safe operation.

China wholesaler Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni   comer gearbox	China wholesaler Agricultural Bevel Gear RC-200 Rotary Cutters Gearboxes Replacement of Omni   comer gearbox
editor by CX 2023-12-01

Recent Posts