Coupling Grease

Why Coupling Grease?
Ample lubrication is crucial for satisfactory gear coupling operation. Gear Coupling Grease is specifically developed for gear coupling applications to improve coupling existence whilst drastically cutting down maintenance time. Its higher viscosity base oil and tackifier mix to keep the grease in area and prevent separation and it is in complete compliance with NSI/AGMA 9001-B97 lubrication recommendations.
Coupling Grease is dark brown in colour and produced which has a lithium soap/polymer thickener, which has superior resistance to oil separation when subjected to higher centrifugal forces commonly observed in couplings. Bearing or general purpose greases tend to separate and reduce effectiveness as a result of substantial centrifugal forces about the numerous substances at high rotational speeds. These higher centrifugal forces encountered in couplings separate the base oil through the thickeners. Heavy thickeners, which have no lubrication qualities, accumulate within the gear tooth mesh place resulting in premature coupling failure. Gear Coupling Grease is intended to remarkably resistant to centrifugal separation from the oil and thickener, which permits the lubricant for being used to get a relatively extended time period of time.
One of many techniques to the success of Gear Coupling Grease may be the variable consistency throughout the operating cycle from the application. The consistency of our gear coupling grease modifications with all the operating problems. Doing work from the lubricant below actual services conditions brings about the grease to turn into semi-fluid, functionally solash lubricating the put on surfaces from the coupling. As the grease cools, it returns on the unique consistency, therefore preventing leakage.
Gear Coupling Grease is available from stock in 14 oz. cartridges, 1 lb. and 5 lb. cans.
Minimizing of coupling dress in
Resistance to water washing
Corrosion and rust protection
High load carrying abilities
Extended relubrication frequency
Use at temperatures up to 325° F
Staying in place below high speeds
Resistance to centrifugal separation
Reduction in down time & maintenance cost
Gear Coupling Grease has a consistency which overlaps the NLGI grades 0 and 1. This grease is specially formulated by using a lithium/polymer thickener and fortified with corrosion, oxidation, extreme pressure, and a effective rust inhibitor additive package.


Recent Posts