DK Detachable Teeth Sprockets

Any injury about the teeth surfaces of a sprocket diminishes the existence with the conveyor chain.
With conventional sprockets, substantially worn sprocket teeth were repaired by teeth padding or even the total sprocket was replaced. In either case, repair was expensive and with teeth padding, accuracy was impaired. We created new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers to the dramatic cost savings in expense and time.
Framework
The teeth is usually replaced by two techniques: person tooth substitute or sectional teeth substitute.
The bolts and nuts made use of for mounting the teeth on to your sprocket are spot-welded to stop loosening.
The respective structures are illustrated to the right.
The over photograph plus the prime correct illustration display a sprocket for person tooth replacement. Since the joint face concerning the replaced teeth and the sprocket is formed within a one of a kind arc, the bonding accuracy is substantial and also the sprocket strength is enhanced. Moreover, since the load acting to the mounting bolts is decreased, there is significantly less likelihood of loosening. This sprocket construction is patented.
You will find two sorts of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are utilized for big sprockets obtaining hefty loads and welded sheet steel hubs for other applications.