General Description
Outfitted with all the zero leak bidirectional checking sole-noid valves, this energy unit is developed for that operation of two independent circuits. Which are respectively for the principal and subordinate platforms with the double scissors lift. Two cut-off valves are employed for decreasing the machine manually in case of energy reduction. If additional independent circuits are expected for the application please get hold of us for availability.
Remark: one. Please seek the advice of our product sales engineer for the various pump displacement, motor power or tank capacity.
two. CSA or UL licensed motors are available upon request.
Particular Notes
one. The AC motor is of S3 duty cycle, which might only work intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean every one of the hydraulic components concerned just before installation of the power unit.
three. Viscosity of your oil shoud be 15~46 cst,and the oil should really be clean and free of impurities,N46 hydraulic oil is encouraged.
four. The electrical power unit must be mounted vertically.
five. Check the oil degree during the tank just after the initial working in the energy unit.
six. Oil altering is needed just after the preliminary a hundred operation hrs,afterwards once each 3000 hrs.


Recent Posts