• Motor gearboxes are maintenance-free, small power sources for driving vent, display screen, home and flap ventilation systems in greenhouses.
• Single phase and three phase options for your own needs.
• Key feature of the drives certainly are a self-braking worm equipment transmission and a built-in linear limit switch unit.
shaft-installed gear Greenhouse Gear Motor motors are full electromechanical drives where the speed of the installed electric motor is decreased to the required value using two to four reduction stages. The drives are high performance and durable and show a compact and lightweight design.
The compact design is manufactured possible through the combination of a spur/worm gear drive with motors optimized for performance. motors also include a 60 to 70 percent weight reduction compared to commercially offered drive motors. This is accomplished through the constant application of aluminium die casting technology, which guarantees a high degree of rigidity for the apparatus and motor housing concurrently.
Each drive is produced and tested specifically for each order and customer. A sophisticated modular system permits an excellent diversity of types and a optimum amount of customization to consumer requirements.
Because of their integrated control units, the shaft-mounted equipment motors are the ideal drives for applications in reversing setting. In both rotation directions, described end positions are safeguarded by two placement limit switches. This uncomplicated solution does not only simplify the cabling, but also makes it possible to configure the end positions efficiently. The high shut-off accuracy of the limit switches guarantees safe operation shifting forwards and backwards.
This gearmotor integrates a gearbox, an electric motor, and limit switches. It really is connected with a steel shaft to turn the pinions for greenhouse ventilation. With the support of electrical panel, it can run and stop after set number of turns. Then it can open up and close the home windows for greenhouse ventilation to right positions.
To keep up the delicate environment in the greenhouse, environment control systems certainly are a necessity. Numerous mechanical systems can be applied in this respect; however glass vent drive systems tend to be the most famous. The drive system consists of a central gearmotor connected to a 40:1 correct angle reducer with dual output shafts. These OP shafts connect to long jack shafts that spread across the roof line of the greenhouse connecting to multiple rack and pinion mechanisms that open up and close large glass home window panes in the ceiling for temperature control.
According to the size of the application (length of the shafting, amount and weight of the windows panes) we offers two gearmotor solutions from a modified version of their 200 series parallel shaft range – 1/5 HP and 1/20 HP. The application Is generally intermittent in use; however the motors are rated continuous because the glass pane home windows may potentially be under constant, subtle adjustment during the day.
Gear Motor, also called Electric motor Gearboxes, is a specific kind 
of electrical motor that is designed to produce high torque while maintaining a low horsepower, or low rate, motor output. Equipment motors are available in many different applications, specifically for the greenhouse, livestock and agricultural sector, our motors can be found options to use roof vents, wall vents,roof shading and screening, they attach to the shaft with chain couplings that compensate for alignment mistakes and can be quickly taken out without disturbing the entire shaft.
shaft-mounted gear motors are finish electromechanical drives where the speed of the installed electric motor is decreased to the desired value using two to four reduction stages. The drives are powerful and durable and show a concise and lightweight design.