The EP Greenhouse gear motor is a compact and lightweight reduction gear motor with an integrated limit switch system that is ideal for assembly of a locally available electric motor. The gear motor is utilized in manually-controlled or climate-controlled ventilation and display systems in greenhouses. The quick and easy-to-install EP gear motor is usually rainproof and windproof. The geared motor includes a high protection class (IP65) and can be utilized within an ambient temperature of 0-60 °C.
The low-noise gear motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated within an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is definitely locked when the decrease gear motor is not running. The fully sealed reduction geared motor comes with an growth chamber with a diaphragm to keep carefully the gear oil at a minimal pressure under all conditions, even at high temperature ranges. Thanks to the use of an growth chamber, the gear motor can be installed in any position. There are no restrictions, because there is no dependence on a bleed connect. The sealed reduction reducer keeps the apparatus essential oil of the geared motor in ideal condition for its entire operating life time. The reducer is ideal for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.
The Gear box reduction gear driver comes with an FT85 motor assembly flange, to which a suitable IEC standard motor can easily be installed (EN 50347).
The Gear box has a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off by the end positions. The limit change system is installed within an built-in chamber and is definitely enclosed by an impact-resistant plastic material cover. The limit switch system is accessible and simple to adjust. The limit switch system’s maximum switching range is definitely 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The gear reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.
The gear driver for greenhouse comes with 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.
Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in the event of software of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Suitable for discontinuous use, operating class s3-30%, optimum activation time 25 a few minutes.
Equipped as regular with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).