Single and dual reduction planetary gear drives to be used with electric, hydraulic, air motors or mechanical power insight from high quickness, low torque sources to deliver decreased Plastic Gear Rack speeds at increased torques. The input side has regular SAE pads for engine mounting. Available in the three output configurations shown below. Many units can be furnished with an integral parking brake.
Solitary reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input rate is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque ratings are intermittent. For constant operation reduce torque rankings to about 1/3 to 1/2 the values shown. Devices provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output aspect has hub for installation vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature is certainly standard on all wheel drives.
Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed round, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE 
pads with splined input. Output side includes a flanged spindle for coupling to the load.
Swing Drives
Ever-Power model 6 is offered with or without integral parking brakes. The “SW” Power Wheel provides extra-huge tapered roller bearings, a ductile iron hub and heat treated ring gear to reduce backlash growth caused by wear. The external bearing nut supplies the greatest in shaft retention and shaft power. Output can be a spindle shaft or various sizes of integral pinion gears.