O-Ring Chain (LD)/X-Ring Chain (LX)

Highest wear resistance available by sealing grease concerning pins and bushings
The durability of chain is considerably enhanced because grease is sealed concerning the pins and bushings by O-rings. The O-ring chain is definitely the most dependable model of your Greatest Lifestyle Chain Series with its superb dress in resistance even in the problems or environments the place chain maintenance is tough.
Advisable uses.
?Situations where regular chain substitute is required as a consequence of wear stretch
?Conditions exactly where lubrication during the services is impossible
?In an atmosphere with significantly soil, sand, dust, and so on.
?Applications that demand power higher than that of a sintered bushing roller chain
Other functions
?Lowering noise. (The noise level is three dB reduce in contrast to standard roller chains.)
?Decreasing vibration with all the friction designed by O-Ring. (The energy loss due to the friction is almost negligible, since the frictional force in between the pins and bushings is for ordinarily in the applications.)
Selection of chains
The strength of an O-ring chain is nearly the exact same as that of a standard roller chain. (Since the pins are longer than people of normal roller chain, the average rupture power is somewhat lower.)
For selecting a suitable chain, refer to “Selection of Chains” .
When the service ambient temperature is greater than 80° C, specific heat resistant O-rings should be utilized. In this instance, get hold of us for a lot more data.
Connecting back links and offset hyperlinks
Two forms of connecting hyperlinks can be found: clearance fit and interference fit. When high strength or durability is required, use interference-fit connecting link. Only 2POJ is obtainable because the offset hyperlink for all sizes.
Sprockets
O-ring chain employs longer pins than a typical roller chain. When applying multiplex O-ring chain, the regular sprocket for multiplex chains cannot be applied.
Caution
O-ring chain will not be proposed in applications exactly where solvents or other substances may perhaps assault “Nitric Rubber”. Distinctive material O-rings can also be out there for these conditions: Please talk to us for specifics. Normally, “Nitric Rubber” is damaged by make contact with using the following chemical supplies.

TAGs:

Recent Posts