TF Variety Flanges
Model TF flanges are made from precisely the same high-strength cast iron as the S flanges, but are created to accommodate the global normal Taper Lock bushing for straightforward installation and elimination
TF Variety flanges allow for mounting the bushing to the front (hub) side of your flange
TF flanges are available in sizes six via sixteen and might be made use of with any kind of sleeve as pictured on page SF-5
TR Variety Flanges
TR flanges are comparable to your TF style, but let for that Taper Lock Bushing to be mounted and removed from
the reverse or serration side from the flange
The constrained torque ratings with the Taper Lock Bushings let TR flanges to only be applied with EPDM or Neoprene sleeves
Unique bushing sizes are employed, so they’ve distinct maximum bores compared to the TF flanges
Sizes 6 by way of sixteen can be found
Taper-Lock Bushings
The sector standard taper lock bushing can be a split style making it possible for a compression match on the flange to your shaft devoid of set screws
The basic style and design makes the set up and elimination effortless whilst the 8° taper grips tight and delivers superb concentricity
A Decreased degree of inventory is often accomplished on account of the numerous other electrical power transmission parts that use Taper Lock Bushings for example: sheaves, sprockets, and pulleys
won’t give the Taper-Lock Bushings themselves as they are broadly accessible from other manufacturers